Call 08048988193 81% Response Rate

Send Email

Investment Casting

Manufacturer of a wide range of products which include alloy investment casting, stainless steel investment casting, investment casting (stainless steel), cookware handle investment casting ( stainless steel), en8 investment casting and hastalloy investment casting.
Alloy Investment Casting
  • Alloy Investment Casting
  • Alloy Investment Casting
  • Alloy Investment Casting
  • Alloy Investment Casting
  • Alloy Investment Casting
  • Alloy Investment Casting
  • Alloy Investment Casting
  • Alloy Investment Casting
  • Alloy Investment Casting
  • Alloy Investment Casting
  • Alloy Investment Casting
  • Alloy Investment Casting

Alloy Investment Casting

Product Price: Rs 400 / KgGet Best Price

Minimum Order Quantity: 100 Kg

Product Brochure

Product Details:
MaterialStainless Steel
Usage/ApplicationsMarine Equipment
FinishPassivated
ColorBlack
PressureHigh Pressure
Country of OriginMade in India
The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 to 5 weeks
    Get Best QuoteRequest A Callback
    STAINLESS STEEL INVESTMENT CASTING
    • STAINLESS STEEL INVESTMENT CASTING
    • STAINLESS STEEL INVESTMENT CASTING
    • STAINLESS STEEL INVESTMENT CASTING
    • STAINLESS STEEL INVESTMENT CASTING

    STAINLESS STEEL INVESTMENT CASTING

    Product Price: Rs 750 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    FinishPassivated
    Material GradeSS316
    MaterialMild Steel
    Usage/ApplicationIndustrial
    BrandSupercast Industries
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 to 5 weeks
    Get Best QuoteRequest A Callback
    INVESTMENT CASTING (STAINLESS STEEL)
    • INVESTMENT CASTING (STAINLESS STEEL)
    • INVESTMENT CASTING (STAINLESS STEEL)
    • INVESTMENT CASTING (STAINLESS STEEL)

    INVESTMENT CASTING (STAINLESS STEEL)

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    Usage/ApplicationIndustrial Machinery
    MaterialSS304
    FinishPassivated
    Material GradeINVESTMENT CASTING
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: AS REQUIRED
    • Delivery Time: 4 TO 5 WEEKS
    Get Best QuoteRequest A Callback
    Cookware Handle Investment Casting ( Stainless Steel)
    • Cookware Handle Investment Casting ( Stainless Steel)
    • Cookware Handle Investment Casting ( Stainless Steel)
    • Cookware Handle Investment Casting ( Stainless Steel)
    • Cookware Handle Investment Casting ( Stainless Steel)
    • Cookware Handle Investment Casting ( Stainless Steel)
    • Cookware Handle Investment Casting ( Stainless Steel)
    • Cookware Handle Investment Casting ( Stainless Steel)
    • Cookware Handle Investment Casting ( Stainless Steel)
    • Cookware Handle Investment Casting ( Stainless Steel)
    • Cookware Handle Investment Casting ( Stainless Steel)
    • Cookware Handle Investment Casting ( Stainless Steel)
    • Cookware Handle Investment Casting ( Stainless Steel)

    Cookware Handle Investment Casting ( Stainless Steel)

    Product Price: Rs 585 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    Usage/ApplicationFood and Beverage Industry
    Materialinvestment casting
    Material GradeSS304
    FinishPassivated
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 WEEKS
    Get Best QuoteRequest A Callback
    EN8 Investment Casting
    • EN8 Investment Casting
    • EN8 Investment Casting
    • EN8 Investment Casting
    • EN8 Investment Casting
    • EN8 Investment Casting
    • EN8 Investment Casting

    EN8 Investment Casting

    Product Price: Rs 310 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    MaterialStainless Steel
    Usage/ApplicationsIndustrial Machinery
    FinishPassivated
    ColorBlack
    PressureHigh Pressure
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: AS PER REQUIRED
    • Delivery Time: 4 WEEKS
    • Packaging Details: CUSTOMISED
    Get Best QuoteRequest A Callback
    HASTALLOY INVESTMENT CASTING
    • HASTALLOY INVESTMENT CASTING
    • HASTALLOY INVESTMENT CASTING
    • HASTALLOY INVESTMENT CASTING
    • HASTALLOY INVESTMENT CASTING
    • HASTALLOY INVESTMENT CASTING
    • HASTALLOY INVESTMENT CASTING
    • HASTALLOY INVESTMENT CASTING
    • HASTALLOY INVESTMENT CASTING
    • HASTALLOY INVESTMENT CASTING
    • HASTALLOY INVESTMENT CASTING
    • HASTALLOY INVESTMENT CASTING
    • HASTALLOY INVESTMENT CASTING
    • HASTALLOY INVESTMENT CASTING

    HASTALLOY INVESTMENT CASTING

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    TypeINVESTMENT CASTING
    PressureHigh Pressure
    MaterialSS 304
    FinishPassivated
    Usage/ApplicationIndustrial
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: AS REQUIREDMENT
    • Packaging Details: CUSTOMIZED
    Get Best QuoteRequest A Callback
    Inner Cover Investment Casting
    • Inner Cover Investment Casting
    • Inner Cover Investment Casting
    • Inner Cover Investment Casting
    • Inner Cover Investment Casting
    • Inner Cover Investment Casting
    • Inner Cover Investment Casting
    • Inner Cover Investment Casting
    • Inner Cover Investment Casting
    • Inner Cover Investment Casting
    • Inner Cover Investment Casting
    • Inner Cover Investment Casting
    • Inner Cover Investment Casting
    • Inner Cover Investment Casting

    Inner Cover Investment Casting

    Product Price: Rs 450 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    TypeINVESTMENT CASTING
    PressureHigh Pressure
    MaterialSS 304
    FinishPassivated
    Usage/ApplicationIndustrial
    SizeCUSTOMIZED
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: 350
    • Delivery Time: 3 To 4 Weeks
    Get Best QuoteRequest A Callback
    Corrosion Resistant Investment Casting
    • Corrosion Resistant Investment Casting
    • Corrosion Resistant Investment Casting
    • Corrosion Resistant Investment Casting
    • Corrosion Resistant Investment Casting
    • Corrosion Resistant Investment Casting
    • Corrosion Resistant Investment Casting
    • Corrosion Resistant Investment Casting
    • Corrosion Resistant Investment Casting
    • Corrosion Resistant Investment Casting
    • Corrosion Resistant Investment Casting
    • Corrosion Resistant Investment Casting
    • Corrosion Resistant Investment Casting
    • Corrosion Resistant Investment Casting

    Corrosion Resistant Investment Casting

    Product Price: Rs 575 / KgGet Best Price

    Minimum Order Quantity: 500 Kg

    Product Brochure

    Product Details:
    MaterialSS 316
    Weight0.100
    Material GradeCF8M
    PressureMedium Pressure
    GradeCF8M
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Item Code: 203
    • Production Capacity: 5000
    • Delivery Time: 3 to 4 Weeks
    Get Best QuoteRequest A Callback
    Glass Fitting Investment Casting
    • Glass Fitting Investment Casting
    • Glass Fitting Investment Casting
    • Glass Fitting Investment Casting
    • Glass Fitting Investment Casting
    • Glass Fitting Investment Casting
    • Glass Fitting Investment Casting
    • Glass Fitting Investment Casting
    • Glass Fitting Investment Casting
    • Glass Fitting Investment Casting
    • Glass Fitting Investment Casting
    • Glass Fitting Investment Casting
    • Glass Fitting Investment Casting
    • Glass Fitting Investment Casting

    Glass Fitting Investment Casting

    Product Price: Rs 450 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    ColorSILVER
    PressureMedium Pressure
    MaterialSS 304
    FinishPassivated
    Usage/ApplicationIndustrial
    We are manufacturing abrashive resistance casting like Mangense steel casting high carbon and high chrome casting.These type of casting mostly using cement plant and grinding industries.

    Additional Information:

    • Item Code: 99
    • Production Capacity: 500
    • Delivery Time: 3 to 4 weeks
    • Packaging Details: CUSTOMIZE
    Get Best QuoteRequest A Callback
    IMPELLER INVESTMENT CASTING
    • IMPELLER INVESTMENT CASTING
    • IMPELLER INVESTMENT CASTING
    • IMPELLER INVESTMENT CASTING
    • IMPELLER INVESTMENT CASTING
    • IMPELLER INVESTMENT CASTING
    • IMPELLER INVESTMENT CASTING
    • IMPELLER INVESTMENT CASTING
    • IMPELLER INVESTMENT CASTING
    • IMPELLER INVESTMENT CASTING
    • IMPELLER INVESTMENT CASTING
    • IMPELLER INVESTMENT CASTING
    • IMPELLER INVESTMENT CASTING

    IMPELLER INVESTMENT CASTING

    Product Price: Rs 750 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    MaterialSS 316
    Material GradeSS 304
    Packaging TypeCUSTOMIZED
    FinishPassivated
    Usage/ApplicationIndustrial
    We are manufacturing abrashive resistance casting like Mangense steel casting high carbon and high chrome casting.These type of casting mostly using cement plant and grinding industries.

    Additional Information:

    • Item Code: 100
    • Production Capacity: 500
    • Delivery Time: 3 TO 4 WEEKS
    Get Best QuoteRequest A Callback
    High Alloy Steel Investment Casting
    • High Alloy Steel Investment Casting
    • High Alloy Steel Investment Casting
    • High Alloy Steel Investment Casting
    • High Alloy Steel Investment Casting
    • High Alloy Steel Investment Casting
    • High Alloy Steel Investment Casting
    • High Alloy Steel Investment Casting
    • High Alloy Steel Investment Casting
    • High Alloy Steel Investment Casting
    • High Alloy Steel Investment Casting
    • High Alloy Steel Investment Casting
    • High Alloy Steel Investment Casting
    • High Alloy Steel Investment Casting

    High Alloy Steel Investment Casting

    Product Price: Rs 385 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    MaterialStainless Alloy Steel
    Typealloy steel casting
    ColorBlack
    PressureHigh Pressure
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 to 5 weeks
    Get Best QuoteRequest A Callback
    Body Investment Casting
    • Body Investment Casting
    • Body Investment Casting
    • Body Investment Casting
    • Body Investment Casting
    • Body Investment Casting

    Body Investment Casting

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    MaterialStainless Steel
    Usage/ApplicationsIndustrial Machinery
    TypeSS304
    FinishPassivated
    ColorBlack
    PressureHigh Pressure
    Country of OriginMade in India
    Reckoned amid one of the prominent business names, we are actively committed towards presenting a wide spectrum of SS Investment Casting. Widely appreciated for its durability, reliability and high strength, these offered castings are hugely recommended. Also, we are examining these on a number of grounds before getting shipped at the destination of our customers.

    Features:
    • Rugged Precise dimensions
    • Easy to install Grades: Corrosion Resistant Casting Heat Resistant Casting
    • Wear Resistant Casting
    • Corrosion and Water Resistant Casting
    • Abrasion and Wear Resistant Casting
    • Use for Material: Nickel AlloyCobalt Alloy
    • Copper AlloyAluminum AlloyZinc Alloy


    Additional Information:

    • Delivery Time: 4 TO 5 WEEKS
    Get Best QuoteRequest A Callback
    MONEL METAL INVESTMENT CASTING
    • MONEL METAL INVESTMENT CASTING
    • MONEL METAL INVESTMENT CASTING
    • MONEL METAL INVESTMENT CASTING
    • MONEL METAL INVESTMENT CASTING
    • MONEL METAL INVESTMENT CASTING
    • MONEL METAL INVESTMENT CASTING
    • MONEL METAL INVESTMENT CASTING
    • MONEL METAL INVESTMENT CASTING
    • MONEL METAL INVESTMENT CASTING
    • MONEL METAL INVESTMENT CASTING
    • MONEL METAL INVESTMENT CASTING
    • MONEL METAL INVESTMENT CASTING
    • MONEL METAL INVESTMENT CASTING

    MONEL METAL INVESTMENT CASTING

    Product Price: Rs 5,500 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    FinishPassivated
    ColorBlack
    PressureHigh Pressure
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 to 5 weeks
    Get Best QuoteRequest A Callback
    PRECISION INVESTMENT CASTING
    • PRECISION INVESTMENT CASTING
    • PRECISION INVESTMENT CASTING
    • PRECISION INVESTMENT CASTING
    • PRECISION INVESTMENT CASTING
    • PRECISION INVESTMENT CASTING
    • PRECISION INVESTMENT CASTING
    • PRECISION INVESTMENT CASTING
    • PRECISION INVESTMENT CASTING
    • PRECISION INVESTMENT CASTING
    • PRECISION INVESTMENT CASTING
    • PRECISION INVESTMENT CASTING

    PRECISION INVESTMENT CASTING

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    MaterialStainless Steel
    FinishPassivated
    Finishing TypeSS 304
    FinishingPolished
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: as required
    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    STAINLESS STEEL CASTING
    • STAINLESS STEEL CASTING
    • STAINLESS STEEL CASTING
    • STAINLESS STEEL CASTING
    • STAINLESS STEEL CASTING
    • STAINLESS STEEL CASTING
    • STAINLESS STEEL CASTING
    • STAINLESS STEEL CASTING
    • STAINLESS STEEL CASTING

    STAINLESS STEEL CASTING

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Material Grade304 SS
    MaterialStainless Steel
    PressureHigh Pressure
    Weight80gm
    GradeSS314
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 WEEKS
    Get Best QuoteRequest A Callback
    Engineering Investment Casting
    • Engineering Investment Casting
    • Engineering Investment Casting
    • Engineering Investment Casting
    • Engineering Investment Casting
    • Engineering Investment Casting
    • Engineering Investment Casting
    • Engineering Investment Casting
    • Engineering Investment Casting
    • Engineering Investment Casting
    • Engineering Investment Casting
    • Engineering Investment Casting
    • Engineering Investment Casting
    • Engineering Investment Casting

    Engineering Investment Casting

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    Usage/ApplicationIndustrial Machinery
    MaterialInvestment Casting
    Material GradeSS304
    FinishPassivated
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4WEEKS
    Get Best QuoteRequest A Callback
    Pipe Coupler Investment Casting
    • Pipe Coupler Investment Casting
    • Pipe Coupler Investment Casting
    • Pipe Coupler Investment Casting
    • Pipe Coupler Investment Casting
    • Pipe Coupler Investment Casting
    • Pipe Coupler Investment Casting
    • Pipe Coupler Investment Casting
    • Pipe Coupler Investment Casting
    • Pipe Coupler Investment Casting
    • Pipe Coupler Investment Casting
    • Pipe Coupler Investment Casting
    • Pipe Coupler Investment Casting
    • Pipe Coupler Investment Casting

    Pipe Coupler Investment Casting

    Product Price: Rs 487 / KgGet Best Price

    Minimum Order Quantity: 200 Kg

    Product Brochure

    Product Details:
    ColorBlack
    PressureMedium Pressure
    MaterialSS 304
    FinishPassivated
    Usage/ApplicationIndustrial
    We are manufacturing abrashive resistance casting like Mangense steel casting high carbon and high chrome casting.These type of casting mostly using cement plant and grinding industries.

    Additional Information:

    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    High Alloy Steel Castings
    • High Alloy Steel Castings
    • High Alloy Steel Castings
    • High Alloy Steel Castings
    • High Alloy Steel Castings
    • High Alloy Steel Castings
    • High Alloy Steel Castings
    • High Alloy Steel Castings
    • High Alloy Steel Castings
    • High Alloy Steel Castings
    • High Alloy Steel Castings
    • High Alloy Steel Castings
    • High Alloy Steel Castings
    • High Alloy Steel Castings

    High Alloy Steel Castings

    Product Price: Rs 585 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    TypeCF8M
    ColorBlack
    PressureMedium Pressure
    MaterialSS 316
    FinishPassivated
    Usage/ApplicationIndustrial
    We are manufacturing abrashive resistance casting like Mangense steel casting high carbon and high chrome casting.These type of casting mostly using cement plant and grinding industries.

    Additional Information:

    • Item Code: 121
    • Production Capacity: 500
    • Delivery Time: 3 TO 4 WEEKS
    Get Best QuoteRequest A Callback
    HANDLE INVESTMENT CASTING
    • HANDLE INVESTMENT CASTING
    • HANDLE INVESTMENT CASTING
    • HANDLE INVESTMENT CASTING
    • HANDLE INVESTMENT CASTING
    • HANDLE INVESTMENT CASTING

    HANDLE INVESTMENT CASTING

    Product Price: Rs 500 / KgGet Best Price

    Product Brochure

    Product Details:
    Usage/ApplicationsGeneral Engineering
    Usage/ApplicationFood and Beverage Industry
    MaterialSS 304
    FinishPassivated
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).

    Get Best QuoteRequest A Callback
    Big Bracket Investment Casting
    • Big Bracket Investment Casting
    • Big Bracket Investment Casting
    • Big Bracket Investment Casting
    • Big Bracket Investment Casting
    • Big Bracket Investment Casting
    • Big Bracket Investment Casting

    Big Bracket Investment Casting

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    MaterialStainless Steel
    FinishPassivated
    WeightBELOW OR MORE THEN 100 GM UPTO 70KG
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: AS PER REQUIREMENT
    • Delivery Time: 4 WEEKS
    • Packaging Details: CUSTOMIZED
    Get Best QuoteRequest A Callback
    Grade Investment Casting SS 316L
    • Grade Investment Casting SS 316L
    • Grade Investment Casting SS 316L
    • Grade Investment Casting SS 316L
    • Grade Investment Casting SS 316L
    • Grade Investment Casting SS 316L
    • Grade Investment Casting SS 316L
    • Grade Investment Casting SS 316L
    • Grade Investment Casting SS 316L
    • Grade Investment Casting SS 316L
    • Grade Investment Casting SS 316L
    • Grade Investment Casting SS 316L
    • Grade Investment Casting SS 316L
    • Grade Investment Casting SS 316L

    Grade Investment Casting SS 316L

    Product Price: Rs 651 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    MaterialINVESTMENT CASTING
    Material GradeSS316L
    FinishPassivated
    Usage/ApplicationIndustrial
    SizeCUSTOMIZED
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Item Code: SS316L
    • Production Capacity: AS REQUIREDMENT
    • Delivery Time: 4 WEEKS
    • Packaging Details: CUSTOMIZED
    Get Best QuoteRequest A Callback
    Precision Investment Casting
    • Precision Investment Casting
    • Precision Investment Casting
    • Precision Investment Casting
    • Precision Investment Casting

    Precision Investment Casting

    Product Price: Rs 75 / PieceGet Best Price

    Minimum Order Quantity: 5000 Piece

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    MaterialStainless Steel
    FinishEP
    Weight130
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 3 to 4 week
    • Packaging Details: Bags
    Get Best QuoteRequest A Callback
    Investment Casting Grade 4130
    • Investment Casting Grade 4130
    • Investment Casting Grade 4130
    • Investment Casting Grade 4130
    • Investment Casting Grade 4130

    Investment Casting Grade 4130

    Product Price: Rs 86 / PieceGet Best Price

    Minimum Order Quantity: 100 Piece

    Product Brochure

    Product Details:
    MaterialStainless Steel
    Usage/ApplicationsGeneral Engineering
    FinishPassivated
    ColorBlack
    PressureHigh Pressure
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: as Required
    • Delivery Time: 4 to 5 weeks
    Get Best QuoteRequest A Callback
    Furnace Spacer Investment Casting ( S.S 310)
    • Furnace Spacer Investment Casting ( S.S 310)
    • Furnace Spacer Investment Casting ( S.S 310)
    • Furnace Spacer Investment Casting ( S.S 310)
    • Furnace Spacer Investment Casting ( S.S 310)
    • Furnace Spacer Investment Casting ( S.S 310)
    • Furnace Spacer Investment Casting ( S.S 310)
    • Furnace Spacer Investment Casting ( S.S 310)
    • Furnace Spacer Investment Casting ( S.S 310)
    • Furnace Spacer Investment Casting ( S.S 310)
    • Furnace Spacer Investment Casting ( S.S 310)
    • Furnace Spacer Investment Casting ( S.S 310)
    • Furnace Spacer Investment Casting ( S.S 310)
    • Furnace Spacer Investment Casting ( S.S 310)

    Furnace Spacer Investment Casting ( S.S 310)

    Product Price: Rs 850 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Material GradeSS 304
    Packaging TypeBags
    FinishPassivated
    Usage/ApplicationIndustrial
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).

    Get Best QuoteRequest A Callback
    CF8M Investment casting
    • CF8M Investment casting
    • CF8M Investment casting
    • CF8M Investment casting
    • CF8M Investment casting
    • CF8M Investment casting
    • CF8M Investment casting
    • CF8M Investment casting

    CF8M Investment casting

    Product Price: Rs 580 / KgGet Best Price

    Minimum Order Quantity: 15 Kg

    Product Brochure

    Product Details:
    Material GradeSS 316
    Packaging TypeBags
    FinishPassivated
    Usage/ApplicationIndustrial
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    HINGE INVESTMENT CASTING
    • HINGE INVESTMENT CASTING
    • HINGE INVESTMENT CASTING
    • HINGE INVESTMENT CASTING
    • HINGE INVESTMENT CASTING
    • HINGE INVESTMENT CASTING
    • HINGE INVESTMENT CASTING
    • HINGE INVESTMENT CASTING
    • HINGE INVESTMENT CASTING
    • HINGE INVESTMENT CASTING
    • HINGE INVESTMENT CASTING
    • HINGE INVESTMENT CASTING
    • HINGE INVESTMENT CASTING

    HINGE INVESTMENT CASTING

    Product Price: Rs 400 / KgGet Best Price

    Minimum Order Quantity: 500 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationIndustrial
    TypeCUSTOMISED
    FinishPassivated
    PressureMedium Pressure
    MaterialSAE 1018
    Featurespassivated
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).

    Get Best QuoteRequest A Callback
    Body Investment Casting (Stainless Steel)
    • Body Investment Casting (Stainless Steel)
    • Body Investment Casting (Stainless Steel)
    • Body Investment Casting (Stainless Steel)
    • Body Investment Casting (Stainless Steel)
    • Body Investment Casting (Stainless Steel)
    • Body Investment Casting (Stainless Steel)
    • Body Investment Casting (Stainless Steel)

    Body Investment Casting (Stainless Steel)

    Product Price: Rs 475 / KgGet Best Price

    Minimum Order Quantity: 500 Kg

    Product Brochure

    Product Details:
    MaterialSS 304
    Material GradeCF8
    Packaging TypeBAGS
    FinishPassivated
    Usage/ApplicationIndustrial
    BrandSUPERCAST
    Weight0.200 gram
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Item Code: 256
    • Production Capacity: 1000
    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    Alloy Steel Investment Casting
    • Alloy Steel Investment Casting
    • Alloy Steel Investment Casting
    • Alloy Steel Investment Casting
    • Alloy Steel Investment Casting
    • Alloy Steel Investment Casting
    • Alloy Steel Investment Casting
    • Alloy Steel Investment Casting
    • Alloy Steel Investment Casting
    • Alloy Steel Investment Casting
    • Alloy Steel Investment Casting
    • Alloy Steel Investment Casting
    • Alloy Steel Investment Casting
    • Alloy Steel Investment Casting

    Alloy Steel Investment Casting

    Product Price: Rs 610 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    PressureMedium Pressure
    MaterialSS 316
    FinishPassivated
    Usage/ApplicationIndustrial
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    Liners Investment Casting
    • Liners Investment Casting
    • Liners Investment Casting
    • Liners Investment Casting
    • Liners Investment Casting
    • Liners Investment Casting
    • Liners Investment Casting
    • Liners Investment Casting
    • Liners Investment Casting
    • Liners Investment Casting
    • Liners Investment Casting
    • Liners Investment Casting
    • Liners Investment Casting
    • Liners Investment Casting

    Liners Investment Casting

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Finishing TypeSS 304
    FinishPassivated
    FinishingPolished
    BrandSupercast
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    HASTELLOY CASTING INVESTMENT CASTING
    • HASTELLOY CASTING INVESTMENT CASTING
    • HASTELLOY CASTING INVESTMENT CASTING
    • HASTELLOY CASTING INVESTMENT CASTING
    • HASTELLOY CASTING INVESTMENT CASTING
    • HASTELLOY CASTING INVESTMENT CASTING
    • HASTELLOY CASTING INVESTMENT CASTING
    • HASTELLOY CASTING INVESTMENT CASTING
    • HASTELLOY CASTING INVESTMENT CASTING
    • HASTELLOY CASTING INVESTMENT CASTING
    • HASTELLOY CASTING INVESTMENT CASTING
    • HASTELLOY CASTING INVESTMENT CASTING
    • HASTELLOY CASTING INVESTMENT CASTING
    • HASTELLOY CASTING INVESTMENT CASTING

    HASTELLOY CASTING INVESTMENT CASTING

    Product Price: Rs 550 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    MaterialSS 316
    Material GradeInvestment casting
    PressureMedium Pressure
    GradeSS 316
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Item Code: 55
    • Production Capacity: 500
    • Delivery Time: 3 To 4 Weeks
    Get Best QuoteRequest A Callback
    CHEMICAL PUMP INVESTMENT CASTING
    • CHEMICAL PUMP INVESTMENT CASTING
    • CHEMICAL PUMP INVESTMENT CASTING
    • CHEMICAL PUMP INVESTMENT CASTING
    • CHEMICAL PUMP INVESTMENT CASTING
    • CHEMICAL PUMP INVESTMENT CASTING
    • CHEMICAL PUMP INVESTMENT CASTING
    • CHEMICAL PUMP INVESTMENT CASTING
    • CHEMICAL PUMP INVESTMENT CASTING
    • CHEMICAL PUMP INVESTMENT CASTING

    CHEMICAL PUMP INVESTMENT CASTING

    Product Price: Rs 450 / KgGet Best Price

    Minimum Order Quantity: 500 Kg

    Product Brochure

    Product Details:
    PressureMedium Pressure
    MaterialSS 304
    FinishPassivated
    Usage/ApplicationIndustrial
    Featurespassivated
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    HASTELLOY C22 IMPELLER INVESTMENT CASTING
    • HASTELLOY C22 IMPELLER INVESTMENT CASTING
    • HASTELLOY C22 IMPELLER INVESTMENT CASTING
    • HASTELLOY C22 IMPELLER INVESTMENT CASTING
    • HASTELLOY C22 IMPELLER INVESTMENT CASTING
    • HASTELLOY C22 IMPELLER INVESTMENT CASTING
    • HASTELLOY C22 IMPELLER INVESTMENT CASTING
    • HASTELLOY C22 IMPELLER INVESTMENT CASTING
    • HASTELLOY C22 IMPELLER INVESTMENT CASTING
    • HASTELLOY C22 IMPELLER INVESTMENT CASTING
    • HASTELLOY C22 IMPELLER INVESTMENT CASTING
    • HASTELLOY C22 IMPELLER INVESTMENT CASTING
    • HASTELLOY C22 IMPELLER INVESTMENT CASTING
    • HASTELLOY C22 IMPELLER INVESTMENT CASTING

    HASTELLOY C22 IMPELLER INVESTMENT CASTING

    Product Price: Rs 630 / KgGet Best Price

    Minimum Order Quantity: 500 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationIndustrial
    FinishPolished
    ColorBlack
    PressureMedium Pressure
    MaterialSS 316
    Featurespassivated
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).

    Get Best QuoteRequest A Callback

    EXPLORE MORE CATEGORIES

    Contact Us
     
    Thank youYour Enquiry has been sent successfully.
    © Supercast Industries. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.