Call 08048988193 84% Response Rate

Send Email

Stainless Steel Investment Casting

Prominent & Leading Manufacturer from Vasai, we offer vacuum investment casting, s.s.304 investment casting, precision investment casting, cf8 stainless steel investment casting, cf3m investment casting and nickel-200 investment casting.
Vacuum Investment Casting
  • Vacuum Investment Casting
  • Vacuum Investment Casting
  • Vacuum Investment Casting

Vacuum Investment Casting

Product Price: Rs 490 / KgGet Best Price

Minimum Order Quantity: 100 Kg

Product Brochure

Product Details:
MaterialStainless Steel
Usage/ApplicationsIndustrial Machinery
FinishPassivated
ColorBlack
PressureHigh Pressure
Country of OriginMade in India
The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 Weeks
    Get Best QuoteRequest A Callback
    S.S.304 INVESTMENT CASTING
    • S.S.304 INVESTMENT CASTING
    • S.S.304 INVESTMENT CASTING
    • S.S.304 INVESTMENT CASTING
    • S.S.304 INVESTMENT CASTING
    • S.S.304 INVESTMENT CASTING
    • S.S.304 INVESTMENT CASTING
    • S.S.304 INVESTMENT CASTING
    • S.S.304 INVESTMENT CASTING
    • S.S.304 INVESTMENT CASTING
    • S.S.304 INVESTMENT CASTING
    • S.S.304 INVESTMENT CASTING
    • S.S.304 INVESTMENT CASTING
    • S.S.304 INVESTMENT CASTING

    S.S.304 INVESTMENT CASTING

    Product Price: Rs 490 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    PressureMedium Pressure
    Packaging TypeBox
    MaterialStainless Steel
    Weight2.5 kg
    Material GradeSS 304
    BrandSupercast Industries
    Usage/ApplicationIndustries
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).

    Get Best QuoteRequest A Callback
    Precision Investment Casting
    • Precision Investment Casting
    • Precision Investment Casting
    • Precision Investment Casting
    • Precision Investment Casting
    • Precision Investment Casting
    • Precision Investment Casting
    • Precision Investment Casting

    Precision Investment Casting

    Product Price: Rs 490 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    Usage/ApplicationMachine part
    FinishPassivated
    MaterialStainless Steel
    Weight70kg
    Material Grade316 L
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: As requirement
    • Delivery Time: 4 to 5 weeks
    Get Best QuoteRequest A Callback
    CF8 STAINLESS STEEL INVESTMENT CASTING
    • CF8 STAINLESS STEEL INVESTMENT CASTING
    • CF8 STAINLESS STEEL INVESTMENT CASTING
    • CF8 STAINLESS STEEL INVESTMENT CASTING
    • CF8 STAINLESS STEEL INVESTMENT CASTING
    • CF8 STAINLESS STEEL INVESTMENT CASTING
    • CF8 STAINLESS STEEL INVESTMENT CASTING

    CF8 STAINLESS STEEL INVESTMENT CASTING

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    Usage/ApplicationIndustrial
    MaterialStainless Steel
    Material GradeS304
    FinishPassivated
    Weight5 kg
    Product CodeCF8
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 TO 5 WEEKS
    Get Best QuoteRequest A Callback
    CF3M  INVESTMENT CASTING
    • CF3M  INVESTMENT CASTING
    • CF3M  INVESTMENT CASTING
    • CF3M  INVESTMENT CASTING
    • CF3M  INVESTMENT CASTING
    • CF3M  INVESTMENT CASTING
    • CF3M  INVESTMENT CASTING
    • CF3M  INVESTMENT CASTING
    • CF3M  INVESTMENT CASTING
    • CF3M  INVESTMENT CASTING
    • CF3M  INVESTMENT CASTING
    • CF3M  INVESTMENT CASTING
    • CF3M  INVESTMENT CASTING
    • CF3M  INVESTMENT CASTING

    CF3M INVESTMENT CASTING

    Product Price: Rs 750 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    FinishPassivated
    ColorBlack
    PressureHigh Pressure
    MaterialMild Steel
    Weight2.5 kg
    Product CodeCF3M
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: AS REQUIRED
    • Delivery Time: 4 WEEKS
    Get Best QuoteRequest A Callback
    NICKEL-200 INVESTMENT CASTING
    • NICKEL-200 INVESTMENT CASTING
    • NICKEL-200 INVESTMENT CASTING
    • NICKEL-200 INVESTMENT CASTING
    • NICKEL-200 INVESTMENT CASTING
    • NICKEL-200 INVESTMENT CASTING
    • NICKEL-200 INVESTMENT CASTING
    • NICKEL-200 INVESTMENT CASTING
    • NICKEL-200 INVESTMENT CASTING
    • NICKEL-200 INVESTMENT CASTING
    • NICKEL-200 INVESTMENT CASTING
    • NICKEL-200 INVESTMENT CASTING

    NICKEL-200 INVESTMENT CASTING

    Product Price: Rs 2,000 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Typeinvestment cating
    PressureHigh Pressure
    Materialnickel
    FinishPassivated
    Usage/ApplicationIndustrial
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: as required
    • Delivery Time: 4 weeks
    • Packaging Details: customized
    Get Best QuoteRequest A Callback
    EN8 GRADE INVESTMENT CASTING
    • EN8 GRADE INVESTMENT CASTING
    • EN8 GRADE INVESTMENT CASTING
    • EN8 GRADE INVESTMENT CASTING
    • EN8 GRADE INVESTMENT CASTING
    • EN8 GRADE INVESTMENT CASTING
    • EN8 GRADE INVESTMENT CASTING
    • EN8 GRADE INVESTMENT CASTING
    • EN8 GRADE INVESTMENT CASTING
    • EN8 GRADE INVESTMENT CASTING
    • EN8 GRADE INVESTMENT CASTING

    EN8 GRADE INVESTMENT CASTING

    Product Price: Rs 535 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    TypeINVESTMENT CASTING
    PressureHigh Pressure
    MaterialSS 316
    FinishPassivated
    Usage/ApplicationIndustrial
    Country of OriginMade in India
    he process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: AS REQUIREDMENT
    • Packaging Details: CUSTOMIZED
    Get Best QuoteRequest A Callback
    EN9 GRADE INVESTMENT CASTING
    • EN9 GRADE INVESTMENT CASTING
    • EN9 GRADE INVESTMENT CASTING
    • EN9 GRADE INVESTMENT CASTING
    • EN9 GRADE INVESTMENT CASTING
    • EN9 GRADE INVESTMENT CASTING
    • EN9 GRADE INVESTMENT CASTING
    • EN9 GRADE INVESTMENT CASTING
    • EN9 GRADE INVESTMENT CASTING
    • EN9 GRADE INVESTMENT CASTING
    • EN9 GRADE INVESTMENT CASTING

    EN9 GRADE INVESTMENT CASTING

    Product Price: Rs 300 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    TypeSS 304
    PressureHigh Pressure
    MaterialINVESTMENT CASTING
    FinishPassivated
    Usage/ApplicationIndustrial
    he process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: AS REQUIREDMENT
    • Packaging Details: CUSTOMIZED
    Get Best QuoteRequest A Callback
    Lost Wax Investment Casting
    • Lost Wax Investment Casting
    • Lost Wax Investment Casting
    • Lost Wax Investment Casting
    • Lost Wax Investment Casting
    • Lost Wax Investment Casting
    • Lost Wax Investment Casting
    • Lost Wax Investment Casting
    • Lost Wax Investment Casting
    • Lost Wax Investment Casting
    • Lost Wax Investment Casting
    • Lost Wax Investment Casting
    • Lost Wax Investment Casting
    • Lost Wax Investment Casting

    Lost Wax Investment Casting

    Product Price: Rs 550 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Material316
    FinishPassivated
    Usage/ApplicationIndustrial
    Grade Standard316
    Country of OriginMade in India
    we are leading manufacturer of Alloy Steel Investment casting.
    This alloy casting are widly used for marine application due to their excellent resistance to sea water corrosion. Impingement corrosion occured by flowing sea water. Low macrofouling rate and good fabricability.

    Additional Information:

    • Production Capacity: AS PER REQUIREMENT.
    • Delivery Time: 3 TO 4 WEEKS
    Get Best QuoteRequest A Callback
    High alloy steel Investment Casting
    • High alloy steel Investment Casting
    • High alloy steel Investment Casting
    • High alloy steel Investment Casting
    • High alloy steel Investment Casting
    • High alloy steel Investment Casting
    • High alloy steel Investment Casting
    • High alloy steel Investment Casting
    • High alloy steel Investment Casting
    • High alloy steel Investment Casting
    • High alloy steel Investment Casting

    High alloy steel Investment Casting

    Product Price: Rs 400 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    TypeCUSTOMIZED
    ColorBlack
    PressureHigh Pressure
    MaterialCUSTOMIZED
    FinishPassivated
    Usage/ApplicationIndustrial
    we are leading manufacturer of Alloy Steel Investment casting.
    This alloy casting are widly used for marine application due to their excellent resistance to sea water corrosion. Impingement corrosion occured by flowing sea water. Low macrofouling rate and good fabricability.

    Additional Information:

    • Production Capacity: AS PER REQUIREMENT
    • Delivery Time: 3 TO 4 WEEK
    Get Best QuoteRequest A Callback
    SS 304 Investment Casting
    • SS 304 Investment Casting
    • SS 304 Investment Casting
    • SS 304 Investment Casting
    • SS 304 Investment Casting
    • SS 304 Investment Casting
    • SS 304 Investment Casting
    • SS 304 Investment Casting
    • SS 304 Investment Casting
    • SS 304 Investment Casting
    • SS 304 Investment Casting
    • SS 304 Investment Casting
    • SS 304 Investment Casting

    SS 304 Investment Casting

    Product Price: Rs 450 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    TypeSS304
    ColorBlack
    PressureHigh Pressure
    Material GradeSS304
    MaterialSS304
    FinishPassivated
    Usage/ApplicationIndustrial
    we are leading manufacturer of Alloy Steel Investment casting.
    This alloy casting are widly used for marine application due to their excellent resistance to sea water corrosion. Impingement corrosion occured by flowing sea water. Low macrofouling rate and good fabricability.

    Additional Information:

    • Production Capacity: AS PER REQUIREMENT
    • Delivery Time: 4 WEEKS
    Get Best QuoteRequest A Callback
    T.C CLAMP INVESTMENT CASTING
    • T.C CLAMP INVESTMENT CASTING
    • T.C CLAMP INVESTMENT CASTING
    • T.C CLAMP INVESTMENT CASTING
    • T.C CLAMP INVESTMENT CASTING
    • T.C CLAMP INVESTMENT CASTING
    • T.C CLAMP INVESTMENT CASTING
    • T.C CLAMP INVESTMENT CASTING
    • T.C CLAMP INVESTMENT CASTING
    • T.C CLAMP INVESTMENT CASTING
    • T.C CLAMP INVESTMENT CASTING
    • T.C CLAMP INVESTMENT CASTING
    • T.C CLAMP INVESTMENT CASTING
    • T.C CLAMP INVESTMENT CASTING

    T.C CLAMP INVESTMENT CASTING

    Product Price: Rs 500 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery, Industrial
    MaterialSS304
    Material GradeSS 316
    FinishPassivated
    Packaging TypeBags
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 TO 5 WEEKS
    Get Best QuoteRequest A Callback
    Automobile Engineering Investment Casting
    • Automobile Engineering Investment Casting
    • Automobile Engineering Investment Casting
    • Automobile Engineering Investment Casting
    • Automobile Engineering Investment Casting
    • Automobile Engineering Investment Casting
    • Automobile Engineering Investment Casting
    • Automobile Engineering Investment Casting
    • Automobile Engineering Investment Casting
    • Automobile Engineering Investment Casting
    • Automobile Engineering Investment Casting
    • Automobile Engineering Investment Casting
    • Automobile Engineering Investment Casting

    Automobile Engineering Investment Casting

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationIndustrial, Industrial Machinery
    FinishPolished
    ColorBlack
    PressureMedium Pressure
    MaterialSS 304
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: more then 100 kg.. as per requirement
    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    Precision Castings SS3116
    • Precision Castings SS3116
    • Precision Castings SS3116
    • Precision Castings SS3116
    • Precision Castings SS3116
    • Precision Castings SS3116
    • Precision Castings SS3116
    • Precision Castings SS3116

    Precision Castings SS3116

    Product Price: Rs 610 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    MaterialStainless Steel
    TypeCUSTOMISED
    ColorBlack
    PressureHigh Pressure
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 WEEKS
    • Packaging Details: AS REQUIRED
    Get Best QuoteRequest A Callback
    Mechanical Seal Investment Casting
    • Mechanical Seal Investment Casting
    • Mechanical Seal Investment Casting
    • Mechanical Seal Investment Casting
    • Mechanical Seal Investment Casting
    • Mechanical Seal Investment Casting
    • Mechanical Seal Investment Casting
    • Mechanical Seal Investment Casting
    • Mechanical Seal Investment Casting
    • Mechanical Seal Investment Casting
    • Mechanical Seal Investment Casting
    • Mechanical Seal Investment Casting
    • Mechanical Seal Investment Casting
    • Mechanical Seal Investment Casting

    Mechanical Seal Investment Casting

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    Usage/ApplicationIndustrial Machinery
    MaterialINVESTMENT CASTING
    FinishPassivated
    Material GradeSS304
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 WEEKS
    Get Best QuoteRequest A Callback
    EN 24 Investment casting
    • EN 24 Investment casting
    • EN 24 Investment casting
    • EN 24 Investment casting
    • EN 24 Investment casting
    • EN 24 Investment casting
    • EN 24 Investment casting

    EN 24 Investment casting

    Product Price: Rs 335 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    Usage/ApplicationIndustrial Machinery
    MaterialRAW CASTING
    Material GradeEN24
    FinishPassivated
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: AS REQUIREMENT
    • Delivery Time: 4 WEKKS
    Get Best QuoteRequest A Callback
    HK GRADE INVESTMENT CASTING
    • HK GRADE INVESTMENT CASTING
    • HK GRADE INVESTMENT CASTING
    • HK GRADE INVESTMENT CASTING
    • HK GRADE INVESTMENT CASTING
    • HK GRADE INVESTMENT CASTING
    • HK GRADE INVESTMENT CASTING
    • HK GRADE INVESTMENT CASTING
    • HK GRADE INVESTMENT CASTING
    • HK GRADE INVESTMENT CASTING
    • HK GRADE INVESTMENT CASTING
    • HK GRADE INVESTMENT CASTING
    • HK GRADE INVESTMENT CASTING
    • HK GRADE INVESTMENT CASTING

    HK GRADE INVESTMENT CASTING

    Product Price: Rs 575 / KgGet Best Price

    Minimum Order Quantity: 500 Kg

    Product Brochure

    Product Details:
    MaterialSS 316
    Material GradeCF8M
    Packaging TypeBAGS
    FinishPassivated
    Usage/ApplicationIndustrial
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Item Code: 222
    • Production Capacity: 1000
    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    INVESTMENT CASTING
    • INVESTMENT CASTING
    • INVESTMENT CASTING
    • INVESTMENT CASTING
    • INVESTMENT CASTING
    • INVESTMENT CASTING
    • INVESTMENT CASTING
    • INVESTMENT CASTING
    • INVESTMENT CASTING
    • INVESTMENT CASTING
    • INVESTMENT CASTING
    • INVESTMENT CASTING
    • INVESTMENT CASTING

    INVESTMENT CASTING

    Product Price: Rs 585 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationIndustrial
    FinishPassivated
    TypeINVESTMENT CASTING
    PressureHigh Pressure
    MaterialSS 316
    Surface TreatmentCUSTOMIZED
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: AS REQUIREDMENT
    • Delivery Time: 4 WEEKS
    Get Best QuoteRequest A Callback
    Investment casting
    • Investment casting
    • Investment casting
    • Investment casting
    • Investment casting
    • Investment casting
    • Investment casting
    • Investment casting
    • Investment casting
    • Investment casting
    • Investment casting

    Investment casting

    Product Price: Rs 485 / KgGet Best Price

    Product Brochure

    Product Details:
    BrandSupercast
    MaterialSS 316
    FinishingPolished
    Hardness185 BHN
    Weight15 kg
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: 1000
    • Delivery Time: 45 days
    Get Best QuoteRequest A Callback
    Investment Casting
    • Investment Casting
    • Investment Casting
    • Investment Casting
    • Investment Casting
    • Investment Casting

    Investment Casting

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Colorsilver
    PressureMedium Pressure
    MaterialSS304
    FinishPassivated
    Usage/ApplicationIndustrial
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: 350kg
    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    MILD STEEL INVESTMENT CASTINGS

    MILD STEEL INVESTMENT CASTINGS

    Product Price: Rs 500 / KgGet Best Price

    Product Brochure

    Product Details:
    TypeCUSTOMISED
    PressureMedium Pressure
    MaterialSS 304
    FinishPassivated
    Usage/ApplicationIndustrial
    Featurespassivated
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).

    Get Best QuoteRequest A Callback
    S.S.17- 4 PH  INVESTMENT CASTING
    • S.S.17- 4 PH  INVESTMENT CASTING
    • S.S.17- 4 PH  INVESTMENT CASTING
    • S.S.17- 4 PH  INVESTMENT CASTING
    • S.S.17- 4 PH  INVESTMENT CASTING
    • S.S.17- 4 PH  INVESTMENT CASTING
    • S.S.17- 4 PH  INVESTMENT CASTING
    • S.S.17- 4 PH  INVESTMENT CASTING
    • S.S.17- 4 PH  INVESTMENT CASTING
    • S.S.17- 4 PH  INVESTMENT CASTING
    • S.S.17- 4 PH  INVESTMENT CASTING
    • S.S.17- 4 PH  INVESTMENT CASTING
    • S.S.17- 4 PH  INVESTMENT CASTING
    • S.S.17- 4 PH  INVESTMENT CASTING

    S.S.17- 4 PH INVESTMENT CASTING

    Product Price: Rs 500 / KgGet Best Price

    Product Brochure

    Product Details:
    Material17-4 PH
    FinishPassivated
    we are leading manufacturer of Alloy Steel Investment casting.
    This alloy casting are widly used for marine application due to their excellent resistance to sea water corrosion. Impingement corrosion occured by flowing sea water. Low macrofouling rate and good fabricability.
    Get Best QuoteRequest A Callback
    Fabricate Engineering  Investment Casting
    • Fabricate Engineering  Investment Casting
    • Fabricate Engineering  Investment Casting
    • Fabricate Engineering  Investment Casting
    • Fabricate Engineering  Investment Casting
    • Fabricate Engineering  Investment Casting
    • Fabricate Engineering  Investment Casting
    • Fabricate Engineering  Investment Casting
    • Fabricate Engineering  Investment Casting
    • Fabricate Engineering  Investment Casting
    • Fabricate Engineering  Investment Casting
    • Fabricate Engineering  Investment Casting
    • Fabricate Engineering  Investment Casting
    • Fabricate Engineering  Investment Casting

    Fabricate Engineering Investment Casting

    Product Price: Rs 450 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    MaterialSS 304
    TypeInvestment casting
    ColorBlack
    PressureMedium Pressure
    Country of OriginMade in India
    We are manufacturing abrashive resistance casting like Mangense steel casting high carbon and high chrome casting.These type of casting mostly using cement plant and grinding industries.

    Additional Information:

    • Item Code: 106
    • Production Capacity: 500
    • Delivery Time: 3 to 4 weeks
    • Packaging Details: CUSTOMIZED
    Get Best QuoteRequest A Callback

    EXPLORE MORE CATEGORIES

    Contact Us
     
    Thank youYour Enquiry has been sent successfully.
    © Supercast Industries. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.