Call 08048988193 72% Response Rate

Send Email

Alloy Steel Investment Casting

Our range of products include alloy steel investment casting, investment castings ss 304, alloy-20 steel investment casting, automobile investment castings, investment casting clamp and copper nickel investment casting.
ALLOY STEEL INVESTMENT CASTING
  • ALLOY STEEL INVESTMENT CASTING
  • ALLOY STEEL INVESTMENT CASTING
  • ALLOY STEEL INVESTMENT CASTING
  • ALLOY STEEL INVESTMENT CASTING

ALLOY STEEL INVESTMENT CASTING

Product Price: Rs 610 / KgGet Best Price

Minimum Order Quantity: 100 Kg

Product Brochure

Product Details:
Usage/ApplicationsIndustrial Machinery
FinishPassivated
ColorBlack
Weight30 kg
PressureHigh Pressure
Usage/ApplicationIndustrial
FinishingPowder Coated
The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 Weeks
    Get Best QuoteRequest A Callback
    Investment Castings SS 304
    • Investment Castings SS 304
    • Investment Castings SS 304
    • Investment Castings SS 304
    • Investment Castings SS 304
    • Investment Castings SS 304
    • Investment Castings SS 304
    • Investment Castings SS 304
    • Investment Castings SS 304
    • Investment Castings SS 304
    • Investment Castings SS 304
    • Investment Castings SS 304
    • Investment Castings SS 304
    • Investment Castings SS 304

    Investment Castings SS 304

    Product Price: Rs 685 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Typeinvestment casting
    ColorBlack
    Material GradeSS304
    PressureHigh Pressure
    Surface FinishingCUSTOMIZED
    MaterialAlloy Steel
    FinishPassivated
    Usage/ApplicationIndustrial
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: as requirement
    • Packaging Details: customized
    Get Best QuoteRequest A Callback
    Alloy-20 Steel Investment Casting
    • Alloy-20 Steel Investment Casting
    • Alloy-20 Steel Investment Casting
    • Alloy-20 Steel Investment Casting
    • Alloy-20 Steel Investment Casting
    • Alloy-20 Steel Investment Casting
    • Alloy-20 Steel Investment Casting
    • Alloy-20 Steel Investment Casting
    • Alloy-20 Steel Investment Casting
    • Alloy-20 Steel Investment Casting
    • Alloy-20 Steel Investment Casting
    • Alloy-20 Steel Investment Casting
    • Alloy-20 Steel Investment Casting
    • Alloy-20 Steel Investment Casting

    Alloy-20 Steel Investment Casting

    Product Price: Rs 1,350 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    MaterialStainless Alloy Steel
    ColorBlack
    PressureHigh Pressure
    Weight1.25 kg
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: as requirement
    • Delivery Time: 4 to 5 weeks
    Get Best QuoteRequest A Callback
    Automobile Investment Castings
    • Automobile Investment Castings
    • Automobile Investment Castings
    • Automobile Investment Castings
    • Automobile Investment Castings
    • Automobile Investment Castings
    • Automobile Investment Castings
    • Automobile Investment Castings
    • Automobile Investment Castings
    • Automobile Investment Castings
    • Automobile Investment Castings
    • Automobile Investment Castings
    • Automobile Investment Castings
    • Automobile Investment Castings

    Automobile Investment Castings

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    MaterialStainless Steel
    Usage/ApplicationsIndustrial Machinery
    FinishPassivated
    ColorBlack
    PressureHigh Pressure
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: as requirement
    • Delivery Time: 4 to 5 weeks
    Get Best QuoteRequest A Callback
    Investment Casting Clamp
    • Investment Casting Clamp
    • Investment Casting Clamp
    • Investment Casting Clamp
    • Investment Casting Clamp
    • Investment Casting Clamp
    • Investment Casting Clamp
    • Investment Casting Clamp
    • Investment Casting Clamp
    • Investment Casting Clamp
    • Investment Casting Clamp
    • Investment Casting Clamp
    • Investment Casting Clamp
    • Investment Casting Clamp

    Investment Casting Clamp

    Product Price: Rs 550 / KgGet Best Price

    Product Brochure

    Product Details:
    Usage/ApplicationIndustrial
    FinishPowder Coating
    TypeInvestment casting
    Colorsilver
    PressureMedium Pressure
    Material316
    We are manufacturing abrashive resistance casting like Mangense steel casting high carbon and high chrome casting.These type of casting mostly using cement plant and grinding industries.
    Get Best QuoteRequest A Callback
    Copper Nickel Investment Casting
    • Copper Nickel Investment Casting
    • Copper Nickel Investment Casting
    • Copper Nickel Investment Casting
    • Copper Nickel Investment Casting
    • Copper Nickel Investment Casting
    • Copper Nickel Investment Casting
    • Copper Nickel Investment Casting
    • Copper Nickel Investment Casting
    • Copper Nickel Investment Casting
    • Copper Nickel Investment Casting
    • Copper Nickel Investment Casting
    • Copper Nickel Investment Casting
    • Copper Nickel Investment Casting

    Copper Nickel Investment Casting

    Product Price: Rs 3,000 / KgGet Best Price

    Minimum Order Quantity: 500 Kg

    Product Brochure

    Product Details:
    Finishing TypeCustomized
    DesignCustomized
    Packing TypeCustomized
    ShapeCustomized
    Surface FinishingCustomized
    Tolerance0.2 mm
    Weight100 kg
    Surface TreatmentCustomized
    FeaturesSea water corrosion resistant casting
    Colorcopper
    SizeCustomized
    we are leading manufacturer of cupronickel casting.
    This alloy casting are widly used for marine application due to their excellent resistance to sea water corrosion. Impingement corrosion occured by flowing sea water. Low macrofouling rate and good fabricability.

    Additional Information:

    • Item Code: 115
    • Production Capacity: 1000
    • Delivery Time: 45 days
    • Packaging Details: Customized
    Get Best QuoteRequest A Callback
    S.S 310  Investment Casting
    • S.S 310  Investment Casting
    • S.S 310  Investment Casting
    • S.S 310  Investment Casting
    • S.S 310  Investment Casting
    • S.S 310  Investment Casting
    • S.S 310  Investment Casting
    • S.S 310  Investment Casting
    • S.S 310  Investment Casting
    • S.S 310  Investment Casting
    • S.S 310  Investment Casting
    • S.S 310  Investment Casting
    • S.S 310  Investment Casting

    S.S 310 Investment Casting

    Product Price: Rs 750 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    Usage/ApplicationIndustrial Machinery
    MaterialINVESTMENT CASTING
    Material GradeSS310
    FinishPassivated
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 WEEKS
    Get Best QuoteRequest A Callback
    PURE NICKEL INVESTMENT CASTING
    • PURE NICKEL INVESTMENT CASTING
    • PURE NICKEL INVESTMENT CASTING
    • PURE NICKEL INVESTMENT CASTING
    • PURE NICKEL INVESTMENT CASTING
    • PURE NICKEL INVESTMENT CASTING
    • PURE NICKEL INVESTMENT CASTING
    • PURE NICKEL INVESTMENT CASTING
    • PURE NICKEL INVESTMENT CASTING
    • PURE NICKEL INVESTMENT CASTING
    • PURE NICKEL INVESTMENT CASTING
    • PURE NICKEL INVESTMENT CASTING

    PURE NICKEL INVESTMENT CASTING

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationIndustrial, Industrial Machinery
    FinishPassivated
    ColorBlack
    PressureMedium Pressure
    MaterialSS 304
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: As Requirement
    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    Hinges Investment Casting
    • Hinges Investment Casting
    • Hinges Investment Casting
    • Hinges Investment Casting
    • Hinges Investment Casting
    • Hinges Investment Casting
    • Hinges Investment Casting
    • Hinges Investment Casting
    • Hinges Investment Casting
    • Hinges Investment Casting
    • Hinges Investment Casting
    • Hinges Investment Casting
    • Hinges Investment Casting
    • Hinges Investment Casting

    Hinges Investment Casting

    Product Price: Rs 100 / PieceGet Best Price

    Minimum Order Quantity: 100 Piece

    Product Brochure

    Product Details:
    Usage/ApplicationsAutomotive
    FinishPassivated
    MaterialStainless Steel
    Finish TypeSteel
    Weight0.284
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 to 5 weeks
    Get Best QuoteRequest A Callback
    SUPERALLOY INVESTMENT CASTING
    • SUPERALLOY INVESTMENT CASTING
    • SUPERALLOY INVESTMENT CASTING
    • SUPERALLOY INVESTMENT CASTING
    • SUPERALLOY INVESTMENT CASTING
    • SUPERALLOY INVESTMENT CASTING
    • SUPERALLOY INVESTMENT CASTING
    • SUPERALLOY INVESTMENT CASTING
    • SUPERALLOY INVESTMENT CASTING
    • SUPERALLOY INVESTMENT CASTING
    • SUPERALLOY INVESTMENT CASTING
    • SUPERALLOY INVESTMENT CASTING
    • SUPERALLOY INVESTMENT CASTING
    • SUPERALLOY INVESTMENT CASTING

    SUPERALLOY INVESTMENT CASTING

    Product Price: Rs 665 / KgGet Best Price

    Minimum Order Quantity: 500 Kg

    Product Brochure

    Product Details:
    TypeImpeller
    PressureMedium Pressure
    MaterialSS 316
    FinishPassivated
    Usage/ApplicationIndustrial
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 3 to 4 weeek
    Get Best QuoteRequest A Callback
    Low Alloy Steel Castings
    • Low Alloy Steel Castings
    • Low Alloy Steel Castings
    • Low Alloy Steel Castings
    • Low Alloy Steel Castings
    • Low Alloy Steel Castings
    • Low Alloy Steel Castings
    • Low Alloy Steel Castings
    • Low Alloy Steel Castings

    Low Alloy Steel Castings

    Product Price: Rs 500 / KgGet Best Price

    Minimum Order Quantity: 200 Kg

    Product Brochure

    Product Details:
    MaterialSS 316
    TypeCUSTOMISED
    PressureMedium Pressure
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 3 to 4 Weeks
    Get Best QuoteRequest A Callback

    EXPLORE MORE CATEGORIES

    Contact Us
     
    Thank youYour Enquiry has been sent successfully.
    © Supercast Industries. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.