Call 08048988193 83% Response Rate

Send Email

Precision Investment Casting

Our product range includes a wide range of lever arm investment casting ( stainless steel), lobe pump investment casting( stainless steel), vacuum pump investment casting ( stainless steel), mild steel investment casting, grade investment casting ss 316 and high chromium investment casting.
LEVER ARM INVESTMENT CASTING ( STAINLESS STEEL)
  • LEVER ARM INVESTMENT CASTING ( STAINLESS STEEL)
  • LEVER ARM INVESTMENT CASTING ( STAINLESS STEEL)
  • LEVER ARM INVESTMENT CASTING ( STAINLESS STEEL)
  • LEVER ARM INVESTMENT CASTING ( STAINLESS STEEL)
  • LEVER ARM INVESTMENT CASTING ( STAINLESS STEEL)
  • LEVER ARM INVESTMENT CASTING ( STAINLESS STEEL)
  • LEVER ARM INVESTMENT CASTING ( STAINLESS STEEL)
  • LEVER ARM INVESTMENT CASTING ( STAINLESS STEEL)
  • LEVER ARM INVESTMENT CASTING ( STAINLESS STEEL)
  • LEVER ARM INVESTMENT CASTING ( STAINLESS STEEL)
  • LEVER ARM INVESTMENT CASTING ( STAINLESS STEEL)
  • LEVER ARM INVESTMENT CASTING ( STAINLESS STEEL)

LEVER ARM INVESTMENT CASTING ( STAINLESS STEEL)

Product Price: Rs 500 / KgGet Best Price

Minimum Order Quantity: 100 Kg

Product Brochure

Product Details:
Usage/ApplicationsIndustrial Machinery
Usage/ApplicationIndustrial Machinery
MaterialINVESTMENT CASTING
FinishPassivated
Material GradeSS304
The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: AS REQUIRED
    • Delivery Time: 4 TO 5 WEEKS
    Get Best QuoteRequest A Callback
    LOBE PUMP INVESTMENT CASTING( STAINLESS STEEL)
    • LOBE PUMP INVESTMENT CASTING( STAINLESS STEEL)
    • LOBE PUMP INVESTMENT CASTING( STAINLESS STEEL)
    • LOBE PUMP INVESTMENT CASTING( STAINLESS STEEL)
    • LOBE PUMP INVESTMENT CASTING( STAINLESS STEEL)
    • LOBE PUMP INVESTMENT CASTING( STAINLESS STEEL)
    • LOBE PUMP INVESTMENT CASTING( STAINLESS STEEL)
    • LOBE PUMP INVESTMENT CASTING( STAINLESS STEEL)
    • LOBE PUMP INVESTMENT CASTING( STAINLESS STEEL)
    • LOBE PUMP INVESTMENT CASTING( STAINLESS STEEL)
    • LOBE PUMP INVESTMENT CASTING( STAINLESS STEEL)
    • LOBE PUMP INVESTMENT CASTING( STAINLESS STEEL)
    • LOBE PUMP INVESTMENT CASTING( STAINLESS STEEL)
    • LOBE PUMP INVESTMENT CASTING( STAINLESS STEEL)

    LOBE PUMP INVESTMENT CASTING( STAINLESS STEEL)

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    Usage/ApplicationIndustrial Machinery
    MaterialINVESTMENT CASTING
    FinishPassivated
    Material GradeSS304
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 TO 5 WEEKS
    Get Best QuoteRequest A Callback
    Vacuum Pump Investment Casting ( Stainless Steel)
    • Vacuum Pump Investment Casting ( Stainless Steel)
    • Vacuum Pump Investment Casting ( Stainless Steel)
    • Vacuum Pump Investment Casting ( Stainless Steel)
    • Vacuum Pump Investment Casting ( Stainless Steel)
    • Vacuum Pump Investment Casting ( Stainless Steel)
    • Vacuum Pump Investment Casting ( Stainless Steel)
    • Vacuum Pump Investment Casting ( Stainless Steel)
    • Vacuum Pump Investment Casting ( Stainless Steel)
    • Vacuum Pump Investment Casting ( Stainless Steel)
    • Vacuum Pump Investment Casting ( Stainless Steel)
    • Vacuum Pump Investment Casting ( Stainless Steel)
    • Vacuum Pump Investment Casting ( Stainless Steel)
    • Vacuum Pump Investment Casting ( Stainless Steel)

    Vacuum Pump Investment Casting ( Stainless Steel)

    Product Price: Rs 610 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    Usage/ApplicationIndustrial Machinery
    MaterialINVESTMENT CASTING
    Material GradeSS316
    FinishPassivated
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 WEEKS
    Get Best QuoteRequest A Callback
    MILD STEEL INVESTMENT CASTING
    • MILD STEEL INVESTMENT CASTING
    • MILD STEEL INVESTMENT CASTING
    • MILD STEEL INVESTMENT CASTING
    • MILD STEEL INVESTMENT CASTING
    • MILD STEEL INVESTMENT CASTING
    • MILD STEEL INVESTMENT CASTING

    MILD STEEL INVESTMENT CASTING

    Product Price: Rs 500 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    MaterialMild Steel
    FinishPassivated
    Usage/ApplicationIndustrial
    FeaturesRust Proof
    Weight15 kg
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).

    Get Best QuoteRequest A Callback
    Grade Investment Casting Ss 316
    • Grade Investment Casting Ss 316
    • Grade Investment Casting Ss 316
    • Grade Investment Casting Ss 316
    • Grade Investment Casting Ss 316
    • Grade Investment Casting Ss 316
    • Grade Investment Casting Ss 316
    • Grade Investment Casting Ss 316

    Grade Investment Casting Ss 316

    Product Price: Rs 610 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsGeneral Engineering, Industrial
    FinishPassivated
    PressureMedium Pressure
    MaterialSS 316
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    High Chromium Investment Casting
    • High Chromium Investment Casting
    • High Chromium Investment Casting
    • High Chromium Investment Casting
    • High Chromium Investment Casting
    • High Chromium Investment Casting
    • High Chromium Investment Casting
    • High Chromium Investment Casting
    • High Chromium Investment Casting
    • High Chromium Investment Casting
    • High Chromium Investment Casting
    • High Chromium Investment Casting
    • High Chromium Investment Casting
    • High Chromium Investment Casting

    High Chromium Investment Casting

    Product Price: Rs 487 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    PressureMedium Pressure
    MaterialSS 304
    Finishing Typecustomized
    FinishPassivated
    Usage/ApplicationIndustrial
    Colorcustomized
    Surface Treatmentcustomized
    Sizecustomized
    Shapecustomized
    FeaturesGood durability
    BrandSupercast
    We are manufacturing abrashive resistance casting like Mangense steel casting high carbon and high chrome casting.These type of casting mostly using cement plant and grinding industries.

    Additional Information:

    • Item Code: 118
    • Production Capacity: 500
    • Delivery Time: 30 days
    • Packaging Details: Customized
    Get Best QuoteRequest A Callback
    SS 410 Investment casting
    • SS 410 Investment casting
    • SS 410 Investment casting
    • SS 410 Investment casting

    SS 410 Investment casting

    Product Price: Rs 335 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    Usage/ApplicationIndustrial Machinery
    MaterialSS410
    FinishPassivated
    Material GradeInvestment Casting
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: As requirement
    • Delivery Time: 4 to 5 weeks
    Get Best QuoteRequest A Callback
    Investment Casting Fitting
    • Investment Casting Fitting
    • Investment Casting Fitting
    • Investment Casting Fitting
    • Investment Casting Fitting
    • Investment Casting Fitting
    • Investment Casting Fitting
    • Investment Casting Fitting
    • Investment Casting Fitting
    • Investment Casting Fitting
    • Investment Casting Fitting
    • Investment Casting Fitting
    • Investment Casting Fitting
    • Investment Casting Fitting

    Investment Casting Fitting

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    MaterialStainless Steel
    Usage/ApplicationsIndustrial Machinery
    FinishPassivated
    ColorBlack
    PressureHigh Pressure
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: as requirement
    • Delivery Time: 4 to 5 weeks
    Get Best QuoteRequest A Callback
    Pump Gland Investment Casting
    • Pump Gland Investment Casting
    • Pump Gland Investment Casting
    • Pump Gland Investment Casting
    • Pump Gland Investment Casting
    • Pump Gland Investment Casting
    • Pump Gland Investment Casting
    • Pump Gland Investment Casting
    • Pump Gland Investment Casting
    • Pump Gland Investment Casting
    • Pump Gland Investment Casting
    • Pump Gland Investment Casting
    • Pump Gland Investment Casting
    • Pump Gland Investment Casting

    Pump Gland Investment Casting

    Product Price: Rs 450 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Typepump Gland Investment Casting
    ColorBlack
    PressureMedium Pressure
    MaterialSS 304
    FinishPassivated
    Usage/ApplicationIndustrial
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Item Code: 123
    • Production Capacity: 500
    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    HIGH NICKEL AND CHROME INVESTMENT CASTING
    • HIGH NICKEL AND CHROME INVESTMENT CASTING
    • HIGH NICKEL AND CHROME INVESTMENT CASTING
    • HIGH NICKEL AND CHROME INVESTMENT CASTING
    • HIGH NICKEL AND CHROME INVESTMENT CASTING
    • HIGH NICKEL AND CHROME INVESTMENT CASTING
    • HIGH NICKEL AND CHROME INVESTMENT CASTING
    • HIGH NICKEL AND CHROME INVESTMENT CASTING
    • HIGH NICKEL AND CHROME INVESTMENT CASTING
    • HIGH NICKEL AND CHROME INVESTMENT CASTING
    • HIGH NICKEL AND CHROME INVESTMENT CASTING
    • HIGH NICKEL AND CHROME INVESTMENT CASTING
    • HIGH NICKEL AND CHROME INVESTMENT CASTING
    • HIGH NICKEL AND CHROME INVESTMENT CASTING

    HIGH NICKEL AND CHROME INVESTMENT CASTING

    Product Price: Rs 600 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationIndustrial
    FinishPassivated
    Typeinvestment casting
    ColorBlack
    PressureMedium Pressure
    MaterialSS 316
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: as requirement
    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    HOOK BRACKET INVESTMENT CASTING
    • HOOK BRACKET INVESTMENT CASTING
    • HOOK BRACKET INVESTMENT CASTING
    • HOOK BRACKET INVESTMENT CASTING
    • HOOK BRACKET INVESTMENT CASTING
    • HOOK BRACKET INVESTMENT CASTING
    • HOOK BRACKET INVESTMENT CASTING
    • HOOK BRACKET INVESTMENT CASTING
    • HOOK BRACKET INVESTMENT CASTING
    • HOOK BRACKET INVESTMENT CASTING
    • HOOK BRACKET INVESTMENT CASTING
    • HOOK BRACKET INVESTMENT CASTING
    • HOOK BRACKET INVESTMENT CASTING

    HOOK BRACKET INVESTMENT CASTING

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    Usage/ApplicationsIndustrial Machinery
    MaterialStainless Steel
    FinishPassivated
    Weightmore then 100gm
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Production Capacity: AS REQUIRED
    • Delivery Time: 4 WEEKS
    • Packaging Details: CUSTOMIZED
    Get Best QuoteRequest A Callback
    GENERAL ENGINEERING INVESTMENT CASTING
    • GENERAL ENGINEERING INVESTMENT CASTING
    • GENERAL ENGINEERING INVESTMENT CASTING
    • GENERAL ENGINEERING INVESTMENT CASTING
    • GENERAL ENGINEERING INVESTMENT CASTING
    • GENERAL ENGINEERING INVESTMENT CASTING
    • GENERAL ENGINEERING INVESTMENT CASTING
    • GENERAL ENGINEERING INVESTMENT CASTING
    • GENERAL ENGINEERING INVESTMENT CASTING
    • GENERAL ENGINEERING INVESTMENT CASTING
    • GENERAL ENGINEERING INVESTMENT CASTING
    • GENERAL ENGINEERING INVESTMENT CASTING
    • GENERAL ENGINEERING INVESTMENT CASTING
    • GENERAL ENGINEERING INVESTMENT CASTING

    GENERAL ENGINEERING INVESTMENT CASTING

    Product Price: Rs 550 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    MaterialSS 316
    TypeInvestment casting
    ColorBlack
    PressureMedium Pressure
    GradesSS 316
    Country of OriginMade in India
    We are manufacturing abrashive resistance casting like Mangense steel casting high carbon and high chrome casting.These type of casting mostly using cement plant and grinding industries.

    Additional Information:

    • Item Code: 109
    • Production Capacity: 500
    • Delivery Time: 3 to 4 weeks
    • Packaging Details: customized
    Get Best QuoteRequest A Callback
    Investment Casting CF8
    • Investment Casting CF8
    • Investment Casting CF8
    • Investment Casting CF8
    • Investment Casting CF8
    • Investment Casting CF8
    • Investment Casting CF8
    • Investment Casting CF8
    • Investment Casting CF8
    • Investment Casting CF8
    • Investment Casting CF8
    • Investment Casting CF8
    • Investment Casting CF8
    • Investment Casting CF8

    Investment Casting CF8

    Product Price: Rs 475 / KgGet Best Price

    Minimum Order Quantity: 100 Kg

    Product Brochure

    Product Details:
    TypeCF8
    ColorSILVER
    PressureMedium Pressure
    MaterialSS 304
    FinishPassivated
    Usage/ApplicationIndustrial
    Country of OriginMade in India
    We are manufacturing abrashive resistance casting like Mangense steel casting high carbon and high chrome casting.These type of casting mostly using cement plant and grinding industries.

    Additional Information:

    • Item Code: 120
    • Production Capacity: 500
    • Delivery Time: 3 TO 4 WEEKS
    Get Best QuoteRequest A Callback
    Brass Investment Casting
    • Brass Investment Casting
    • Brass Investment Casting
    • Brass Investment Casting
    • Brass Investment Casting
    • Brass Investment Casting
    • Brass Investment Casting
    • Brass Investment Casting
    • Brass Investment Casting

    Brass Investment Casting

    Product Price: Rs 1,700 / KgGet Best Price

    Minimum Order Quantity: 50 Kg

    Product Brochure

    Product Details:
    MaterialBrass
    Usage/ApplicationsIndustrial Machinery
    FinishPassivated
    ColorGolden
    PressureHigh Pressure
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 4 to 5 weeks
    Get Best QuoteRequest A Callback
    Cobalt Base Alloy Castings
    • Cobalt Base Alloy Castings
    • Cobalt Base Alloy Castings
    • Cobalt Base Alloy Castings
    • Cobalt Base Alloy Castings
    • Cobalt Base Alloy Castings
    • Cobalt Base Alloy Castings
    • Cobalt Base Alloy Castings
    • Cobalt Base Alloy Castings
    • Cobalt Base Alloy Castings
    • Cobalt Base Alloy Castings
    • Cobalt Base Alloy Castings
    • Cobalt Base Alloy Castings
    • Cobalt Base Alloy Castings

    Cobalt Base Alloy Castings

    Product Price: Rs 9,000 / KgGet Best Price

    Product Brochure

    Product Details:
    ColorCustomized
    FinishCustomized
    Usage/ApplicationIndustrial
    FinishingCustomized
    SizeCustomized
    ShapeCustomized
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).

    Get Best QuoteRequest A Callback
    Carbon Steel Casting
    • Carbon Steel Casting
    • Carbon Steel Casting
    • Carbon Steel Casting
    • Carbon Steel Casting
    • Carbon Steel Casting
    • Carbon Steel Casting
    • Carbon Steel Casting
    • Carbon Steel Casting
    • Carbon Steel Casting
    • Carbon Steel Casting
    • Carbon Steel Casting
    • Carbon Steel Casting
    • Carbon Steel Casting

    Carbon Steel Casting

    Product Price: Rs 585 / KgGet Best Price

    Minimum Order Quantity: 500 Kg

    Product Brochure

    Product Details:
    MaterialSS 316
    Weight0.100
    Material GradeInvestment casting
    PressureMedium Pressure
    GradeSS 316
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Item Code: 263
    • Production Capacity: 1000
    • Delivery Time: 3 to 4 Weeks
    Get Best QuoteRequest A Callback
    CARBON STEEL INVESTMENT CASTING
    • CARBON STEEL INVESTMENT CASTING
    • CARBON STEEL INVESTMENT CASTING
    • CARBON STEEL INVESTMENT CASTING
    • CARBON STEEL INVESTMENT CASTING
    • CARBON STEEL INVESTMENT CASTING
    • CARBON STEEL INVESTMENT CASTING
    • CARBON STEEL INVESTMENT CASTING

    CARBON STEEL INVESTMENT CASTING

    Product Price: Rs 587 / KgGet Best Price

    Minimum Order Quantity: 500 Kg

    Product Brochure

    Product Details:
    MaterialStainless Steel
    FinishPassivated
    Weight0.100
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Item Code: 265
    • Production Capacity: 1000
    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    CLAMP INVESTMENT CASTING
    • CLAMP INVESTMENT CASTING
    • CLAMP INVESTMENT CASTING
    • CLAMP INVESTMENT CASTING
    • CLAMP INVESTMENT CASTING
    • CLAMP INVESTMENT CASTING
    • CLAMP INVESTMENT CASTING
    • CLAMP INVESTMENT CASTING
    • CLAMP INVESTMENT CASTING
    • CLAMP INVESTMENT CASTING
    • CLAMP INVESTMENT CASTING
    • CLAMP INVESTMENT CASTING

    CLAMP INVESTMENT CASTING

    Product Price: Rs 487 / KgGet Best Price

    Minimum Order Quantity: 500 Kg

    Product Brochure

    Product Details:
    MaterialSS 304
    Material GradeCF8
    Packaging TypeBAGS
    FinishPassivated
    Usage/ApplicationIndustrial
    BrandSUPERCAST
    Weight0.200 gram
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Item Code: 236
    • Production Capacity: 1000
    • Delivery Time: 3 to 4 Weeks
    Get Best QuoteRequest A Callback
    Bracket Investment Casting
    • Bracket Investment Casting
    • Bracket Investment Casting
    • Bracket Investment Casting
    • Bracket Investment Casting
    • Bracket Investment Casting
    • Bracket Investment Casting
    • Bracket Investment Casting
    • Bracket Investment Casting
    • Bracket Investment Casting
    • Bracket Investment Casting
    • Bracket Investment Casting

    Bracket Investment Casting

    Product Price: Rs 485 / KgGet Best Price

    Minimum Order Quantity: 500 Kg

    Product Brochure

    Product Details:
    MaterialSS 304
    PressureMedium Pressure
    Weight1/ kg
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 3 to 4 weeks
    • Packaging Details: Bags
    Get Best QuoteRequest A Callback
    COBALT ALLOY BUSH INVESTMENT CASTING
    • COBALT ALLOY BUSH INVESTMENT CASTING
    • COBALT ALLOY BUSH INVESTMENT CASTING
    • COBALT ALLOY BUSH INVESTMENT CASTING
    • COBALT ALLOY BUSH INVESTMENT CASTING
    • COBALT ALLOY BUSH INVESTMENT CASTING
    • COBALT ALLOY BUSH INVESTMENT CASTING
    • COBALT ALLOY BUSH INVESTMENT CASTING
    • COBALT ALLOY BUSH INVESTMENT CASTING
    • COBALT ALLOY BUSH INVESTMENT CASTING
    • COBALT ALLOY BUSH INVESTMENT CASTING
    • COBALT ALLOY BUSH INVESTMENT CASTING
    • COBALT ALLOY BUSH INVESTMENT CASTING
    • COBALT ALLOY BUSH INVESTMENT CASTING

    COBALT ALLOY BUSH INVESTMENT CASTING

    Product Price: Rs 500 / KgGet Best Price

    Minimum Order Quantity: 500 Kg

    Product Brochure

    Product Details:
    TypeCUSTOMISED
    FinishPassivated
    PressureMedium Pressure
    MaterialSS 304
    Featurespassivated
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback
    Nickel Alloy Castings - SS 316
    • Nickel Alloy Castings - SS 316
    • Nickel Alloy Castings - SS 316
    • Nickel Alloy Castings - SS 316
    • Nickel Alloy Castings - SS 316
    • Nickel Alloy Castings - SS 316
    • Nickel Alloy Castings - SS 316
    • Nickel Alloy Castings - SS 316

    Nickel Alloy Castings - SS 316

    Product Price: Rs 605 / KgGet Best Price

    Minimum Order Quantity: 200 Kg

    Product Brochure

    Product Details:
    MaterialStainless Steel
    Material GradeSS 316
    Usage/ApplicationIndustrial
    Country of OriginMade in India
    The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required

    Advantages of investment casting 

  • Excellent surface finish
  • High dimensional accuracy
  • Extremely intricate parts are castable
  • Almost any metal can be cast
  • No flash or parting lines

  • Disadvantages of investment casting 

    The main disadvantage is the overall cost, especially for short-run productions Some of the reasons for the high cost include specialized equipment,\ costly refractories, and binders, many operations to make a mold, a lot of labor is needed and occasional minute defects. However, the cost is still less than producing the same part by machining from bar stock; for example, gun manufacturing has moved to investment casting to lower costs of producing pistols Investment casting is used with almost any castable metal. However, aluminum alloys, copper alloys, and steel are the most common. In industrial use, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).



    Additional Information:

    • Delivery Time: 3 to 4 weeks
    Get Best QuoteRequest A Callback

    EXPLORE MORE CATEGORIES

    Contact Us
     
    Thank youYour Enquiry has been sent successfully.
    © Supercast Industries. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.